Perfect Home Theater

Improved spurious adjacent signal rejection The MRF-350 receives Narrow Band RF (radio frequency) signals via the RFX-250 RF Sensor (antenna module). The RFX-250 displays RF interference via a bright red LED which flickers when interference is present. Simply relocate the RFX-250 out of the interference area to resolve the problem. Expand Range You can expand the range by adding additional RFX-250 RF Sensors in remote areas. The MRF-350 can power up to three RFX-250 RF Sensors connected in parallel to the RF Input connector. Variable IR output matches rear panel inputs The MRF-350 is equipped with adjustable IR line outputs. Each output can be individually matched to rear panel IR inputs on any component that is designed to be operated by a standard IR repeater. The outputs utilize a 3.5 mm jack. Control Identical Equipments You can control six identical components or zones — Up to fifteen MRF-350s in the same installation. The MRF-350 has six “addressable” IR Line Outputs. For example, you can control up to six identical TVs with one MRF-350 or route volume commands for a specific zone to a particular zone IR input on a multi-zone pre-amp. If you have more than six identical components or zones, up to 15 MRF-350s can be separately installed to control them—thereby allowing up to 90 identical components or zones in one house. The MRF-350 is compatible with the MX-6000, MX-3000, MX-980, TX-1000, MX-950 and MX-900, MX-880, MX-850, MX-810, MX-650, MX-450, MX-350 universal remote control. Each can be programmed to specifically control components in a particular room by installing a base station at each location. In operation, it’s simple: when you select a device located in the Den, the remote only send commands to the Den. When you select a device located in the Family Room, the remote only sends commands to it. IR Input for multi-zone loop through, keypads or IR repeater systems The MRF-350’s rear panel IR input will relay IR data from IR repeaters or multi-zone keypads to all IR line outputs (does not support IR routing). The 5V, 100mA output will power some keypads directly. Features and Benefits * "No More Pointing" * RF Addressable * IR Routing * Expand operating range up to 100 feet * Compatible RF Sensors (antennas): RFX-250 only. * Compatible remotes: Click Here Specifications * Size: 8.5" x 3.875" x 1.375" * Weight: 4 oz (Mounting bracket and six emitter/flashers included) * RF Freq: 418 or 433 MHZ (Narrow Band) * Range: RF - Up to 100 feet. * IR Flasher: Outputs: 3.5mm Mono Mini Jack * Power Supply: 9V 300mA/110V 60Hz (included) * Warranty: 1 year parts and labor